HeliBond Grout | Helifix Structural Repair - Helifix Structural Restoration Materials

top of page

Helifix white - Conservation Technology.png

Structural Repair Systems

Safety Klean sqr.png

Helifix (Leviat)

HeliBond Grout | Helifix Structural Repair

Structural Repair Grout & Resin

Description:

HeliBond is an injectable, non-shrink, thixotropic, cementitious grout that rapidly develops compressive strength.

Weight / Size:

3L

Approx. Coverage:

10M (Linear)

Product Info:

Non-shrink thixotropic grout Flows easily under pressure to fill voids Rapidly develops compressive strength Cures to 45N/mm² Ready-to-mix components supplied in two-pack sets to reduce waste

Technical Data Sheet

Safety Data Sheet

Safety Data Sheet B

Products

See the full range of products

Contec -Helibar.png

Crack Reinforcement

Helibar

Helical stainless steel reinforcing bar, with substantial tensile properties, used for strengthening and stabilizing masonry in both new build and remedial situations.

Structural Stabilization

CemTie

CemTie is a versatile, fully grouted, remedial helical tie used to stabilize all forms of solid masonry, secure failed lintels and brick rings, reconnecting separated internal and external building walls and repair parapets.

Contec - BowTie.png

Wall Restraint

BowTie

BowTie is a long stainless steel retrofit helical tie used for stabilizing bowing / bulging walls, without any external plates, by securing and anchoring them to internal floor and ceiling joists.

Contec - BowTie HD.png

Heavy-Duty Wall Restraint

BowTie HD

Heavy Duty Remedial ties for restraining bowed walls.

Helifix Movement Joints square.png

Expansion and Flexibility Solutions

Movement Joints

Helifix HeliBar stainless steel helical bars in conjunction with plastic debonding sleeves can be used to create a movement joint in an existing wall.

Masonry Fixings

DryFix

DryFix is a slim, versatile and rapidly installed mechanical pinning and remedial tying system that requires no resin, grout or mechanical expansion.

Helifix SockFix.png

Structural Anchoring

SockFix

Extensive range of mechanical grouted sock anchor systems for stabilising damaged masonry

Helifix Crack Stitching Kit Contec .png

Crack Reinforcement

Crack Stitching Kit

Helifix Crack Stitching Kit - Provides everything you need for quick repairs and stabilizes cracked masonry.

HeliBond Grout.png

High-Performance Bonding Material

Helibond Grout

HeliBond is an injectable, non-shrink, thixotropic, cementitious grout that rapidly develops compressive strength.

Bonding and Anchoring Adhesive

PolyPlus Resin

PolyPlus is a general purpose, two part, nozzle-mixed polyester resin for securing remedial wall ties and resin bonded anchors.

Helifix Heavy Duty Pointing Gun .png

Application tool

Pointing Gun

HeliBond Grout Manual Grouting & Pointing Gun

400ml-polyplus-resin-applicator-10-1-116114-p_edited.png

Application tool

PolyPlus Applicator Gun (400ml)

The PolyPlus Resin Applicator Gun is used to apply PolyPlus 400ml cartridges.

Contec Conservation Technology 2 - Helifix HeliBar Insertion Tool.png

Application tool

HeliBar Insertion Tool

HeliBar Insertion Tool is used to push the helibars ino place

Power Driver Attachment - DryFix.png

Application tool

Power Driver Attachment

For installing the DryFix pinning and tying system; InSkew warm roof batten fixing; TurboFast timber/MDF to masonry fixing

Conservation Technology - Helifix Pinning Nozzle.png

Application tool

Pinning Nozzle

CemTie pinning nozzles are available in 15.0mm diameters and the length is made to suit the CemTie. The cone nozzle must be drilled out to accept the 15mm pinning nozzle.

Contec Conservation Technology 2 - Helifix Pinning Nozzle Cleaner Brush.png

Application tool

Hole Cleaning Brush

Sikadur -31 CF Normal is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on a combination of epoxy resins and special fillers.

Helifix Drill Bits.png

Application tool

Drill Bits

Helifix Masonry Drill Bits

bottom of page

function startup() { colorWell = document.querySelector("#colorWell"); colorWell.value = defaultColor; colorWell.addEventListener("input", updateFirst, false); colorWell.addEventListener("change", updateAll, false); colorWell.select();